16-Channel Analog to Digital Signal Converter for Wind Power Monitoring

• After-sales Service: 2 Years
• Warranty: 2 Years
• Input: 4-20mA/0-20mA/0-10V, etc
• Output: RS232/RS485
• Channels: 16-CH
• Communication Port: RS232/RS485
• Model NO.: ISO AD16
• Dimensions: 158*87.5*59mm
• Operation Temperature: - 45 ~ +80 Centigrade
• Isolation Withstand Voltage: 3kvdc Between Input and Output, 1 Minute, Stray Cu
• Operation Power Supply: +24VDC+-10%
• Export Market: Global
• Transport Package: Adam DIN Rail
• Specification: ISO9001: 2008, CE, RoHS
• Trademark: SUNYUAN
• Origin: Shenzhen
• Production Capacity: 50000PCS/Year

Product Description

16-channle Analog Signal RS232/RS485 Isolated A-D Converter with MODBUS RTU
Appied in Wind Energy Monitoring
ISO AD16 Series

Product introduction:
ISO AD series converter achieve the signal isolated acquisition between sensor and the host and can be used for a variety of sensors .ISO AD series of products can be used in industrial automation RS-232/485 bus system,4-20mA / 0-5V signal measurement, monitoring and control, small-signal measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, A/D conversion and RS-485 serial communication circuit module. Each serial port can connect maximum 256 PCS of ISOAD series modules, means of communication using ASCII character communication protocol or MODBUS RTU communication protocol. Its instruction set compatible with the ADAM modules, the baud rate is set by the user, with other manufacturers control module hanging in the same RS-485 bus, to facilitate host programming.
ISOAD series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory EEPROM inside.
ISOAD series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000VDC isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80. ºCº