16-Channel 4-20mA to Modbus/RS232/RS485 Signal Converter

• Customization: Available
• After-sales Service: 2 Years
• Warranty: 2 Years
• Model NO.: ISO AD16 U/A-232/485
• Input: 4-20mA/0-5V/0-10V/0-75mv, etc.
• Output: RS232/ RS485
• Transport Package: 35mm DIN Rail-Mounted Type
• Specification: ISO9001: 2008, CE, ROHS
• Trademark: SUNYUAN SZ
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 50000PCS/Year

Product Description

16-channel 4-20mA to MODBUS RTU/RS232/RS485 A-D Converter
ISO AD16 Series

Features:
-Low cost, small size
-Analog signal acquisition, isolated conversion RS-485/232 output
-Measuring accuracy > 0.05%, nonlinearity < 0.05%
-RS-485/232 output, can be remotely reconfigured for modules accuracy
-Input signal/Output signal 3000VDC
-Wide power supply range: 8 ~ 50VDC
-High reliability, convenient programming, easy installation and wring
-User can set module address and baud rate, etc.

item no

ISO AD16 Series

Applications:
-Signal testing/ monitoring /control
-Intelligent building control, security and engineering applications
-RS-232/485 industrial automation control system
-Industrial fields signal isolation and long-terms transmission
-Debugging and controlling of equipment operation
-Acquisition and record of industrial field data
-Support Modbus RTU communication protocol
-Development of medical and industrial products
-Current/voltage signal

Product introduction:
ISO AD series converter achieve the signal isolated acquisition between sensor and the host and can be used for a variety of sensors. ISO AD series of products can be used in industrial automation RS-232/485 bus system, 4-20mA / 0-5V signal measurement, monitoring and control, small-signal measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, A/D conversion and RS-485 serial communication circuit module. Each serial port can connect maximum 256 PCS of ISOAD series modules, means of communication using character communication protocol or MODBUS RTU communication protocol. Its instruction set compatible with the ADAM modules, the baud rate is set by the user, with other manufacturers control module hanging in the same RS-485 bus, to facilitate host programming.

ISO AD series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory EEPROM inside.
ISODA series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000VDC isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80.

Model selection
ISOAD16 U(A) -

Vin/Iin
U1: 0-5V A1: 0-1mA
U2: 0-10V A2: 0-10mA
U3: 0-75mV A3: 0-20mA
U4: 0-2.5V A4: 4-20mA
U5: 0-± 5V A5: 0-± 1mA
U6: 0-± 10V A6: 0-± 10mA
U7: 0-± 100mV A7: 0-± 20mA
U8: Customized A8: Customized

Communication interface
485: Output is RS-485 interface
232: Output is RS-232 interface