DIN3 ISO D-O Series PWM Signal 1KHz-9KHz,10KHz -19KHz to 4-20mA Signal Converter
Features Applications :
Unique loop-powered technique used, external power supply is not required.
PWM pulse width signal input, 4-20mA loop powered output type.
10Hz--50kHz PWM signal input, high sensitivity, fast response.
High linearity in full measuring range, non-linearity<0.2%
3kV isolation between input and output.
Extra small size 22x11x9mm, error grade: 0.1, 0.2, 0.5
SIP 8-Pin PCB-mounting, UL94V-O flame-retardant package.
High anti-interference ability on EMC magnetic interference or high frequency signal.
Industrial operating temperature range: -40--+85Cel. deg.
Application :
PMW signal long-distance transmission, isolated conversion.
PLC and Inverter control in industrial site.
Signal Ground wire anti-interference.
Boiler temperature automatic control.
DA Converter designed on the basis of PWM.
Processing control and automatic equipment
PWM to 2-wire 4-20mA signal isolated control,
1-channel input 1-channel output or 2-in 2-out isolated conversion.
General Parameters
| Accuracy,linearity error grade--------------0.1,0.2,0.5 |
Load regulation------------<0.05% meas.val./100ohm |
| Auxiliary power supply -----None |
Isolation----Dual isolation between input and output |
| Operating temperature--- -40 -+85degree |
package-------SIP 8pin |
| Operating humidity-----10-90%(non-condensation |
withstand voltage-----3KV(60HZ/S),leakage current <1mA |
| Storage temperature---------45 - 105degree |
impulse withstand Volt.-----3KV,1.2/50us(peak) |
| storage humidity-------10-95% |
Temperature drift-------0.0050%F,S./Degree (-40- +85degree operating temperature range |
Audited Supplier 
){kind=link}
){kind=link}