ISO 4-20mA Two-Wire Passive Current Loop Powered 4-20mA Isolator/Converter

• Customization: Available
• Input: 4-20mA
• Output: 4-20mA
• Model NO.: ISO 4-20mA
• Isolation Voltage: 3000V
• Package: SIP 12pin PCB-Mouting
• Industrial Temperature: (-45~+85 º C)
• High Linearity: (Nonlinearity<0.2%)
• Small Signal Bandwidth: 50Hz
• Distortion: <0.2%
• Isolated Voltage: 3000VDC
• Transport Package: SIP 12pin or DIN Rail
• Specification: ISO9001: 2008, CE, ROHS
• Trademark: SUNYUAN
• Origin: Shenzhen
• Production Capacity: 50000PCS/Year

Product Description

Two-wire Passive Current Loop Powered 4-20mA Isolator/Converter ISO 4-20mA
Features:

· Low cost, small size, standard SIP12 package
· Electromagnetic Isolation
· Signal input/output, 3000VDC isolated voltage
· No external instrument needed for power supply
· 4-20mA high accuracy of current input/output(distortion<0.2%)
· Industrial temperature(-45~+85 º C)
· High linearity(Nonlinearity<0.2%)
· Small signal bandwidth: 50HZ
· Weld to PCB directly

Applications:

· Analog signal data acquisition and isolation
· Isolated 4-20mA signal transmission
· Industrial process signal isolation
· Ground-loop elimination
· No distortion in long distance signal transmission
· Instrument signal acquisition
· Electric supervision and medical application
· Isolated safe bar
· Biomedical measurements

DESCRIPTION:

ISO 4-20mA Loop Powered Isolator IC recieves 4-20mA/0-20mA signals and transmit them through a single chip. The ceramic hermetic hybrid package contains an electromagnetic coupled converter and current module. The very low input equivalent impendence allows an ultra-wide voltage input range, so that it is able to meet the requirements that no distortion in long-distance signal transmission under the circumstance without any external power. The internal ceramic PCB, resistance and new isolation technique allow the IC to withstand the 3KVDC insulated voltage and meets the industrial requirements like the extremely poor temperature, humidity and shaking conditions. These specifications make the ISO 4-20mA Current Loop Isolation Interface IC very easy to install in PCB.

Parameter	Conditions	Min.	Typical Value	Max.	Unit
Isolation Volt.  AC, 60Hz Insulation Impedance Leak current	10S 240Vrms, 60Hz	1000	2500 10¹²II1 0.5	6000	Vrms ΩIIPf uA
Temp. Drift Non-linearity	-45~+85ºC In range of full span		±50 ±0.1	±100 ±0.2	PPm/ºC %FSK
Input Signal Volt. Range		7.5	12	32	V
Output Linearity Range Output Current  Io Output Voltage Drop  Voh	Io=20mA	0 0.1	4 2	20 40	mA mA V
Output Signal Ripple			5		mV
Frequency Response (small signal bandwidth)	Io=20mA		2		KHz

 

Accuracy, linearity error grade ---------- 0.1, 0.2	Hysteresis error ---------- < 0.5%
Auxiliary power---------- No	Isolation  ---------- signal input and output
Operating Temp. ---------- -20 ~ +70ºC	Insulation Resistance  ---------- ≥20MΩ
Operating Humidity ---------10~90% (no condensation)	Withstand Voltage ---------- 3KV(60HZ/S), leak current 1mA
Storage Temp.---------- -20 ~ +70ºC	Impact Resistance Volt. ---------- 3KV, 1.2/50us (peak value)
Storage Humidity -------10 ~ 95% (no condensation)