4-20mA/0-5V/0-75mV to RJ45 Ethernet A-D Converter with Modbus TCP/Modbus RTU4-20mA/0-5V to RJ45 Ehternet A-D Converter Features
SYADxx Ux/Ax-RJ45 Series
>> Directly convert 4-20mA and other analog data into communication digital data for Ethernet and Can bus.
>> Support 10M Ethernet RJ45 interface, support Modbus TCP communication protocol.
>> Support RS 485/RS 232 serial ports extended, support Modbus RTU protocol.
>> Measuring precision is more than 0.05%, do calibration on the precision of modules by computer is available.
>> 8-channel analog input with common ground, 3000VDC isolation between I/O terminal and the system.
>> Wide range auxiliary power supply wide range: 8 - 50VDC
>> Unique external form, high reliability, programmable, DIN Rail 35 standard installation.
>> User can program to set address, baud rate, etc for the modules.4-20mA/0-5V to RJ45 Ehternet A-D Converter Applications
>>Monitoring, measuring and remotely controlling the industrial field through local area network.
>>Applied in the industrial intelligent system for Ethernet, RS232/485 can bus
>>Gathering 0-10V/4-20mA signal and converting into Ethernet RJ45 output.
>>Sensor signal A/D conversion, network control and long distance transmission.
>>Ethernet multi-channel analog data acquisition, monitoring and long distance transmission.
>>Meters and instruments data acquisition and recording.
>>Monitoring operating data from electric equipment, transportation and other equipment system.
>>Achieve the network operation in Environment protection equipment, security, medical equipment and other equipment. 4-20mA/0-5V to RJ45 Ehternet A-D Converter General Parameters
Typical @ +25ºC,Vs:24VDC)
Input type:Current Input/ Voltage Input
Input offset:±0.1 uA/ºC
Temperature Drift:±15 ppm/ºC (±30 ppm/ºC,Max )
Input Impedance:50Ω (4-20mA/0-20mA/0-±20mA current input )
100Ω (0-10mA/0-±10mA current input )
1KΩ (0-1mA/0-±1mA current input )
More than 1MΩ(voltage input)
Bandwidth:-3 dB 10 Hz
Conversion Rate:10 Sps
CMR:120 dB(1kΩ Source Imbalance @ 50/60 Hz)
NMR:60 dB (1kΩ Source Imbalance @ 50/60 Hz)
Input Terminal Protection:Over-voltage protection, over-current protection
Support standard Modbus RTU protocol and special ASCII character communication protocol, RS232/RS485 interface.
Baud Rate:(300 bps,600 bps,1200 bps,2400 bps,4800 bps,9600 bps,19200 bps,38400bps) ,can be set through software).
Address (0x00~0xFF) can be set through software
Support standard Modbus TCP protocol, RJ4 network interface.
IP address and terminal number can be set through software.
Communication Response Time:100 ms Max.
Operating Power Supply:+8 — 50 VDC wide power supply range, with internal anti-inverse connection and over-voltage
Power Consumption:Less than 2W
Operating Temp.:- 45 — +80ºC
Operating Humidity:10 — 90% (no condensation)
Storage Temp.:- 55 — +85ºC
Storage Humidity:10 — 95% ( no condensation )
Isolation Withstand Voltage :3KVDC between input and output every minute, stray current 1mA, output and power are
Endure Impact Volt:3KVAC, 1.2/50us (peak value)
Dimension:123 x 70x 30mm4-20mA/0-5V to RJ45 Ehternet A-D Converter Model Selection:4-20mA/0-5V to RJ45 Ehternet A-D Converter Terminal Defintion: Note: Copyright Reserved by Sunyuan Technology. For detailed information, please enquire us for data sheet.