RS232/RS485 Serial to Analog Module Ethernet Converter ISO Da Series

• After-sales Service: 2 Years
• Warranty: 2 Years
• Input: RS232/485
• Output: 4-20mA/0-10V/0-5V
• Communication Port: RS232/RS485
• Package: Adam DIN Rail
• Model NO.: ISODA
• Dimensions: 83 Mm X 37 Mm X 51 Mm
• Accuracy: 0.2%
• Isolation Voltage: 3000VDC
• Operation Power Supply: +8~50VDC
• Operation Temperature: - 45 ~ +80 Centigrade
• Export Maeket: Global
• Transport Package: Adam DIN Rail
• Specification: ISO9001: 2008, CE, RoHS
• Trademark: SUNYUAN
• Origin: Shenzhen
• Production Capacity: 50000PCS/Year

Product Description

RS485/232 to 4-20ma/0-5V/0-10V/0-2.5V D-A Converter


ISODA O-
General Parameters
(typical @ +25º C, Vs is 24VDC)
Outputs: Voltage / Current
Accuracy: 0.2%
Output Maladjustment: Current output ± 0.5 uA/º C, voltage output ± 0.1mV/C
Temperature Drift: ± 20 ppm/º C(± 30 ppm/º C, max)
Output Resistance: Current output 350Ω (4-20mA/0-20mA/0-± 20mA output)
Voltage output 10mA (0-5V/0-10V/0-± 5V output)
Communications
Protocol RS-485 or RS232 ASCII format, MODBUS
Baud Rates Software Selectable (300, 600, 1200, 2400, 4800, 9600, 19200, 38400bps)
Address (0~255) Software Selectable
Response Time: 100 ms, max
Operation Power Supply: +8~50VDC
Power Loss: <1.5W
Operation Temperature: - 45 ~ +80º C
Operation Humidity: 10 ~ 95% (non-condensing)
Storage Temperature: - 45 ~ +80º C
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation Input/Output: 3KVDC, 1 minute, leak current: 1mA
Interface and power supply are common-ground.
Endure Impact Voltage: 3KVAC, 1.2/50us(peak value)
Mechanical Dimensions: 83 mm x 37 mm x 51 mm

Model Selection:
ISODA O-
Output voltage or current value Communication Interface
O1: 4-20mA 485: Out is RS-485 interface
O2: 0-20mA 232: Out is RS-232 interface
O4: 0-5V 232/485: Out is one RS232 or RS485 interface
O5: 0-10V (Key-press Choice)
O6: 1-5V
O7: 0-± 5V
O8: User-defined
O9: 0-± 20mA
O10: 0± 10V

Note: When interface type is 232/485, default is RS485 output, user can switch between RS485 and RS232 by pushing down 2 buttons inside the chassis. When both buttons are pushed down, output is RS232, or is RS485 output.

Example:
1. ISODA O1-485 Means 4-20ma signal output, output is RS485 interface
2. ISODA O4-232 Means 0-5V signal output, output is RS232 interface.
3. ISODA O7-232/485 Means 0-± 5V signal output, output is RS485 or RS232 interface
(Key-press Choice)

Output range	Data format	Max	Min
O1:4-20mA	Engineering Units	+20.000	+04.000
	% of FSR	+100.00	+020.00
	Complement of hexadecimal	FFF	333
O2:0-20mA	Engineering Units	+20.000	±00.000
	% of FSR	+100.00	±000.00
	Complement of hexadecimal	FFF	000
O4:0-5V	Engineering Units	+5.0000	±0.0000
	% of FSR	+100.00	±000.00
	Complement of hexadecimal	FFF	000
O5:0-10V	Engineering Units	+10.000	±00.000
	% of FSR	+100.00	±000.00
	Complement of hexadecimal	FFF	000
O6:1-5V	Engineering Units	+5.0000	+1.0000
	% of FSR	+100.00	+020.00
	Complement of hexadecimal	FFF	333
O7:0-±5V	Engineering Units	+5.0000	-5.0000
	% of FSR	+100.00	-100.00
	Complement of hexadecimal	FFF	000
O8:customized	Engineering Units	+100.00	±000.00
	% of FSR	+100.00	±000.00
	Complement of hexadecimal	FFF	000
O9:0-±20mA	Engineering Units	+20.000	-20.000
	% of FSR	+100.00	-100.00
	Complement of hexadecimal	FFF	000
O10:0-±10V	Engineering Units	+10.000	-10.000
	% of FSR	+100.00	-100.00
	Complement of hexadecimal	FFF	000